Miscellaneous Add On Instructions for ControlLogix

posted Nov 14, 2013, 12:23 PM by Darren Ash
  • AOI_FindTool - This allows you to locate the edge of a part relative to a tool spindle.  Initially tested with Kinetix 350 using CIP Motion, PAC used was a 1769-L27ERM.  Similar to the Rockwell Home to Torque AOI.  Created in V21

  • AOI_ReadBytes - Used to read from an iCode interface unit at the tag byte level.  Initially setup and tested with  56RF-IN-IPD22A. Created in V20

  • AOI_WriteBytes - Used to write to an iCode interface unit at the tag byte level.  Initially setup and tested with  56RF-IN-IPD22A. Created in V20
ċ
AOI_FindTool.L5X
(23k)
Darren Ash,
Nov 14, 2013, 12:23 PM
ċ
AOI_ReadBytes.L5X
(17k)
Darren Ash,
Nov 14, 2013, 12:23 PM
ċ
AOI_WriteBytes.L5X
(17k)
Darren Ash,
Nov 14, 2013, 12:23 PM
Comments